Mill Phosphatized Finish

Sales Inquiry

  • SECTION 077200 - ROOF ACCESSORIES

    Mill-Phosphatized Finish: Manufacturer's standard for field painting. Factory Prime Coating: Where field painting is indicated, apply pretreatment and white or light-colored, factory-applied, baked-on epoxy primer coat, with a minimum dry film thickness of . 0.2 mil.

  • NOISEBLOCK Modular Panel Enclosure Systems

    in standard galvanized steel, Type G90, mill phosphatized (satin) finish galvanized steel (readily paintable), stainless steel, Types 304 and 316, aluminum and aluminized steel. Standard material gages for solid outer shell are 18 ga. and 16 ga., perforated (23% .

  • Steel Sheet & Coil Supplier | Curtis Steel Company

    Flat Rolled Steel Products. Curtis Steel carries a full line of sheet and coil ranging in thickness from ¼" to 30 gauge. Products include Galvanized, Cold Rolled, Galvannealed, Bonderized/Phosphatized, Galvalume, Electrogalvanized, HRP&O, and Stainless. While we maintain a large inventory of "stock sized" sheets and coil on the floor available for immediate pick-up or next day delivery .

  • 6 in. x 6 in. Bonderized and Phosphatized 26 Gauge Louver

    Master Flow's 6 in. x 6 in. Utility Louver is designed to relieve heat in small, enclosed areas. Constructed of 26 Gauge galvanized steel. Surface mount with screws or nails (not included).

  • DISTRIBUTION EQUIPMENT Meter Centers or Sockets | K/E .

    K/E Electric Supply Corporation 146 North Groesbeck Highway Mount Clemens, MI 48043 USA (586) 469-3005 [email protected] Hours: Monday-Friday 7AM - 5PM Saturday 7-11AM

  • Spiral Round Duct - Fabricator | Texas

    Appearance and finish – standard factory finish (no special cleaning, welds spray-painted, mill markings, labels and piece-marks visible), paint-ready (welds not painted, removeable labels), and factory painted. SPOT has additional literature giving more specific details for our architectural duct products.

  • SECTION 23 31 13 - Facilities Planning & Construction

    Provide mill-phosphatized finish for surfaces of ducts exposed to view. Stainless Steel Ducts: ASTM A 480/A 480M, Type 316 sheet form with No. 4 finish for surfaces of ducts exposed to view, and Type 304 sheet form with No. 1 finish for concealed ducts. . SECTION 23 31 13

  • San Jose City College PE Building &Wellness Center .

    1-1/4 ounces per square foot total both sides; ducts to have mill-phosphatized finish for surfaces exposed to view. C. Stainless Steel: ASTM A 480/A 480M. D. Aluminum Sheets: ASTM B 209 (ASTM B 209M), alloy 3003, temper H14; with mill finish for concealed ducts and standard, 1-side bright finish .

  • SECTION 233113 - METAL DUCTS PART 1 - GENERAL

    in "Duct Schedule" Article; cold rolled, annealed, sheet. Exposed surface finish shall be No. 2B, No. 2D, No. 3, or No. 4 as indicated in "Duct Schedule" Article. F. Aluminum Sheets: Comply with ASTM B209 Alloy 3003, H14 temper; with mill finish for concealed ducts, and standard, one-side bright finish for duct surfaces exposed to view.

  • SECTION 233113 - METAL DUCTS PART 1 - GENERAL

    SECTION 233113 - METAL DUCTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS . Mill phosphatized. C. Aluminum Sheets: Comply with ASTM B 209 (ASTM B 209M) Alloy 3003, H14 temper; with mill finish for concealed ducts, and standard, one-side bright finish .

  • Specifying Paintgrip - Linx Industries, Inc.

    Specifying Paintgrip. Project specification requirements for paintgrip or mill-phosphatized finishes added to the galvanized coating for exposed ductwork have the ultimate intentions of providing a paintable surface. In theory the "acid" etching of the surface is to provide additional "bite" to the paint and enhances the adhesion of the .

  • GalvInfoNote Galvannealed Coatings 5 How do They Differ .

    GalvInfo Center email: [email protected] Toll free phone: 1-888-880-8802 1 GalvInfoNote 5 Galvannealed Coatings How do They Differ from Galvanized? Introduction The objective of this GalvInfoNote is to explain how a hot-dip galvannealed coating differs from a hot-dip

  • California State University 2013-2014 Updates San Marcos .

    California State University 2013-2014 Updates San Marcos Building Standards GEM 15815 - 1 PART 1 - GENERAL 1.1 SUMMARY A. This Section includes metal ducts for supply, return, outside, and exhaust air-distribution systems in pressure classes from minus 2- to plus 10-inch wg. Metal ducts include the following: 1. Rectangular ducts and fittings. 2.

  • MECHANICAL CRITERIA CONTROL SYSTEM AND SEQUENCE .

    exposed duct, w/ mill phosphatized finish pipe/duct in attic r e a c b return air smoke detector refrigerant (rxxx) detector carbon monoxide detector pressure switch manometer humidistat f f ref ps m h f co mechanical symbol list change in duct size motorized automatic damper (mad) turning vanes flexible duct connection horizontal life safety .

  • Differences Between Galvalume And Galvanized In Metal .

    Jan 15, 2013 · One of the questions most frequently asked by architects is: What are the differences between Galvalume and Galvanized Steel when used in roofing. It comes up so often, we thought we'd take a few minutes and use this week's blog to explain those differences. First, a little bit of background.

  • 23 31 13 Metal Ducts - BidNet

    have mill-phosphatized finish for surfaces exposed to view. C. Reinforcement Shapes and Plates: Galvanized-steel reinforcement where installed on galvanized sheet metal ducts. D. Tie Rods: Galvanized steel, 1/4-inch minimum diameter for lengths 36 inches or less; 3/8-inch minimum diameter for lengths longer than 36 inches.

  • SECTION 233113 - METAL DUCTS PART 1 - GENERAL

    SECTION 233113 - METAL DUCTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS . Mill phosphatized. C. Aluminum Sheets: Comply with ASTM B 209 (ASTM B 209M) Alloy 3003, H14 temper; with mill finish for concealed ducts, and standard, one-side bright finish .

  • SECTION 010000 - GENERAL REQUIREMENTS

    2. Finishes for Surfaces Exposed to View: Mill phosphatized. C. Carbon-Steel Sheets: Comply with ASTM A 1008/A 1008M, with oiled, matte finish for exposed ducts. D. Aluminum Sheets: Comply with ASTM B 209 Alloy 3003, H14 temper; with mill finish for concealed ducts, and standard, one-side bright finish for duct surfaces exposed to view.

  • mill phosphatized finish- Aluminum/Al foil,plate/sheet .

    mill phosphatized finish . If you have any questions or good suggestions on our products and site, or if you want to know more information about our products, please write them and send to us, we will contact you within one business day.

  • Phosphate conversion coating - Wikipedia

    Phosphate coatings are used on steel parts for corrosion resistance, lubrication, or as a foundation for subsequent coatings or painting. It serves as a conversion coating in which a dilute solution of phosphoric acid and phosphate salts is applied via spraying or immersion and chemically reacts with the surface of the part being coated to form a layer of insoluble, crystalline phosphates.

  • SECTION 23 31 13 - HVAC DUCTS AND CASINGS PART 1

    2. Finishes for Surfaces Exposed to View: Mill phosphatized. C. Stainless-Steel Sheets: Comply with ASTM A480/A480M, Type 304 or 316, as indicated in the "Duct Schedule" Article; cold rolled, annealed, sheet. Exposed surface finish shall be No. 2B, No. 2D, No. 3, or No. 4 as indicated in the "Duct Schedule" Article.

  • M0

    having g90 (z275) coating designation; ducts shall have mill-phosphatized finish for surfaces exposed to view. c. carbon-steel sheets: astm a 366/a 366m, cold-rolled sheets; commercial quality; with oiled, matte finish for exposed ducts. d. stainless steel: astm a 480/a 480m, type 316 or 304, and having a no. 2d finish .

  • Technical Data - Cooper Industries

    This finish provides 500 hours protection in salt spray testing per ASTM B117. Pre-Galvanized Zinc (Mill galvanized, hot dip mill galvanized or continuous hot dip galvanized) Pre-galvanized steel is produced by coating coils of sheet steel with zinc by continuously rolling the .

  • Section 15815 - Metal Ducts Rev1

    designation; mill-phosphatized finish for surfaces of ducts exposed to view. B. PVC-Coated Galvanized Steel: UL 181, Class 1 listing. Lock-forming-quality, galvanized, sheet steel with ASTM A 653/A 653M, G90 coating designation; factory-applied, 4-mil PVC coating on exposed surfaces of ducts and fittings (exterior of ducts

  • NOT MEASUREMENT SENSITIVE MIL-STD-171E 19 November .

    and item specifications. Finish numbers should be preceded by the word "finish" to avoid possible confusion with paragraph numbers, for example, "finish 5.1.1 plus 20.4". This does not preclude the acceptance of a proven commercial finish selected by manufacturer, supplier, or contractor and concurred in by the procuring activity.

  • Spiral Pipe Galvanized - ADMP

    Spiral Pipe Galvanized ADMP's spiral pipe, the ultimate in pressure—tight circular tubes of superior quality, are fabricated in exact sizes using galvanized steel. The pipe consists of a smooth interior for low friction loss and a 4 ply spiral lockseam entirely on the outside for high strength and rigidity.

  • NOISEBLOCK™ | Acoustic Enclosures

    Outer and inner shell materials are available in standard galvanized steel, Type G90, mill phosphatized (satin) finish galvanized steel (readily paintable), stainless steel, Types 304 and 316, aluminum and aluminized steel. Standard material gages for solid outer shell are 18 ga. and 16 ga., perforated (23% open area) inner shell is 22 gage. .

  • Paintlock Spiral Pipe | Hercules Industries

    Paintlock Spiral Pipe "Paint Grip" steel is mill phosphatized or galvannealed. Galvanneal steel is, as its name implies, annealed. This annealing softens the steel, making it more prone to dings and dents. Mill phosphatized steel has a zinc phosphate coating. Zinc phosphate is considered dangerous to aquatic life and special handling is .

  • What does phosphatized mean? - definitions

    Definition of phosphatized in the Definitions.net dictionary. Meaning of phosphatized. What does phosphatized mean? Information and translations of phosphatized in the most comprehensive dictionary definitions resource on the web.

  • SECTION 15820 - DUCT ACCESSORIES

    Galvanized, Sheet Steel: Lock-forming quality; ASTM A 653/A 653M, Z275 (G90)coating designation; mill-phosphatized finish for surfaces of ducts exposed to view. Carbon-Steel Sheets: ASTM A 366/A 366M, cold-rolled sheets, commercial quality, with oiled, exposed matte finish.